Parts & Accessories

- Can be used on arm, leg, backpack, or bike - 4-LED design for 360 visibility - Built-in passive reflective strips - Water resistant - Mode: Flashing Off - CR2032 Battery (included) - 75 hour run time - Sold individually

- Elasticated Velcro strap provides many mounting possibilities - Diffused LED light provides 360 visibility - Built in passive reflective strips - Water-resistant - 2 Modes: Off Steady, On Flashing - CR2032 Battery (Included) - 75 Hour run time

Product details - Perfect for mounting compatible Flare taillights to rear rack - Includes a bolt and star washer for extra security - Easiest to install with light installed for better leverage

Put a Flare almost anywhere - For use with all Flare tail lights - Perfect for attaching to a seat pack, belt, backpack, or anything with a loop - 2g

Product details - Compatible with USB rechargeable Flare taillights and all Ion headlights - Fits handlebars/seatposts 22.2-35mm and Ride Tuned Seatmast Caps - Silicone body with a tooled adjustment clamp diameter - When rotated for a Flare, the bracket is angled to compensate for an angled seat tube - 25g

Blendr is the ultimate system for clean and easy integrated installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr MTB Ion Light Mount for a clean, flush look that securely holds your Bontrager Ion light in a perfect position to see and be seen. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Bontrager Ion headlights - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases) - Integrated tab securely holds brake and derailleur housing to reduce clutter on MTB bikes

Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Road Ion Light Mount for a clean, flush look that securely holds your Bontrager Ion light in a perfect position to see and be seen. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Bontrager Ion headlights - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)

Rear LED adapter for "D-Shaped" or flat seatposts found on select bicycles from manufacturers such as BMC, Giant and Specialized. Provides a stable, low-profile mounting surface for compatible LED lights. Compatible LEDs: - Laser Drive Rear - Strip Drive PRO Rear - KTV PRO Smart Rear - Strip Drive Rear STVZO - KTV PRO Rear - KTV Drive Rear STVZO - KTV Drive Rear

End Plug For Femto USB and Stvzo Femto USB Rear

Replacement rubber end plug for the Strip Drive Front, Strip Drive Rear or Strip Drive Pro Rear lights

Replacement rubber end plug for the Hecto Drive, Micro Drive or Mini Drive lights.

Lezyne's Go-Pro LED Adapter allows you to mount your Lezyne LED light to any standard Go-Pro mount. This makes it fast and easy to switch swap out your camera and headlight using the same mount.

Replacement mounting strap for the Zecto and Femto LED lights.

Replacement mounting strap for the Strip Drive LED lights.

Lezyne's Composite Bar Mount is a hard mount made of a reinforced Composite Matrix cradle for a strong and secure attachment of the Mega Drive, Deca Drive, and XL LED lights to the handlebar. It is designed for 25.4 mm or 31.8 mm bars, with the cradle designed to pivot 15 degrees laterally to allow adjustment of the LED light beam angle and directing it where it is most needed. A large thumb screw secures the CM mount to the bar without need of tools, and can be tightened by hand or a 1mm hex key. Molded rubber shims add grip and fine-tune fitting to undersized bars. Composite Bar Mounts are sold in a kit with the Mega Drive, Deca Drive, or XL LED lights.

Lezyne helmet mount for LED bike lights or GoPro action cameras. Follows line-of-sight for optimized night riding or recording. Constructed from durable, mold-injected Composite Matrix construction. Easy to install Velcro strap fits virtually all helmet styles. Compatible with a large number of Lezyne headlights via the GoPro LED Adapter. - Composite matrix helmet light mount with strap system - GoPro adapter

Lezyne replacement mounts for ebike lights.

The Infinite Light Power Pack+ doubles the runtimes of all compatible Lezyne USB-C Front LED units. Compact, versatile design quickly and securely mounts to bars and frames with our adjustable Velcro strap. Its integrated extra-long cable (958mm / 39-inch) plugs directly into lighting systems via waterproof USB-C. This power pack has a 23 Wh and 6600 mAh battery capacity. - Compatible LEDs: Mega Drive 2400+, Super Drive 1800+, Macro Drive 1400+, Lite Drive 1200+, Micro Drive Pro 1000+, Micro Drive 800+, Classic Drive XL 700+, Classic Drive 500+, Fusion Drive Pro 600+, Fusion Drive 500+, Zecto Drive 250+, KTV Drive Pro 300+ - External power pack doubles runtimes of compatible LEDs - 985mm (39") cable length - Can be used as an external USB-C charger for GPS units or mobile phones - Securely mounts to frame with adjustable velcro strap - Powerful 6600 mAh capacity

For CubiCubi 500 / 850 / 1200 - Charges two batteries simultaneously

Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.

For CubiCubi 850 Lighthead - Cartridge battery - 850 Lumens / 3000 mAh battery - Charge phone and other devices with USB charge cable - Recharge via a micro-USB cable

For CubiCubi 1200 Lighthead - Cartridge battery - 1200 Lumens / 6000 mAh battery - Charge phone and other devices with USB charge cable - Recharge via a micro-USB cable

Product details: - Fits all Flare tail lights - Works best with 27.2 - 31.6mm seatposts - Includes 16-degree offset for optimized use on seatposts