Protective/Armor
$114.95 - $119.95
Minimal restrictions, maximized benefits
- D3O® inserts for world-leading impact protection
- Moisture-wicking, open stretch mesh for breathability
- Anti-microbial treatment reduces odor-causing bacteria
- Abrasion-resistant knee panel for added coverage in a fall
- Removable
- D3O® inserts for easy washing
- EN1621-1 Level 1 certified
- 76% Nylon 24% Spandex Micro Lycra
$99.95 - $104.95
Our Enduro Knee Sleeves are trail tuned and offer pedal-friendly protection on the trail. Made from a moisture-wicking micro-lycra material and featuring a nylon mess rear panel, they keep the air flowing as you pedal up and earn the down. They allow full range of motion, thanks again to that high-stretch rear panel, and keep your knees safe from hard trail knocks with the removable D3O elbow inserts that deliver both protection and comfort as you ride.
- Moisture wicking micro-lycra sleeve with nylon mesh rear panel for increased airflow
- Removable D3O knee inserts for the perfect balance of comfort and protection
- Silicone grip top and bottom to hold the guard in place
- Nylon, spandex micro lycra
$114.95 - $129.95
Guards against those elbow blows
The Enduro Pro Elbow Guards are designed to give you the confidence of maximum protection against sneaky trail blows from branches and more, while minimizing the extra bulk and weight so you can still move freely. Slide them on and rip down the trail, and in no time you’ll be singing the praises of the moisture-wicking micro-Lycra sleeve that breathes easy and keeps you fresh. The custom-molded D3O® elbow insert will take whatever your next run throws at you, so go ‘bows out, flat out, and shred with confidence in the Enduro Pro Elbow Guards.
- Designed to offer maximum protection while minimizing bulk and weight
- Moisture wicking micro-Lycra sleeve with nylon mesh forearm panel for increased airflow
- Custom molded D3O® elbow inserts designed by and exclusive to Fox
- Slip-on design for reduced bulk
- Silicon grip top and bottom to hold the guard in place
- D3O® elbow inserts are removable for convenient and quick washing
- Elbow inserts are EN1621-1 Level 1
$139.95 - $144.95
Knee guards built to pedal and protect.
You want that knee protection, but you don't want to sacrifice mobility and pedal efficiency. The Enduro Pro Knee Guards are designed to deliver maximum 'hard knock' protection while keeping the bulkiness to a minimum. Slip them on and they'll stay right where you put them thanks to the rear elastic strap and silicon grip. Sweat isn't an issue either, thanks to their moisture-wicking material and mesh rear panel to keep the air flowing while you shred.
- Designed to offer maximum protection while minimizing bulk and weight
- Moisture-wicking micro-Lycra sleeve with nylon mesh rear panel for increased airflow
- Custom molded D3O® knee inserts designed by and exclusive to Fox
- Slip-on design for reduced bulk
- Rear elastic strap and silicone grip top and bottom to hold the guard in place
- D3O® knee inserts are removable for convenient and quick washing
- Knee inserts are EN1621-1 Level 1
- Note: No technology or product can fully prevent the risk of injury or death
$259.95
Minimal restrictions, maximized benefits.
- Removable CE EN1621-2 Level 1 Certified D3O® Viper Stealth™ back insert features world-leading impact protection technology
- Large perforation and flex grooves in the back foam contours and flexes with rider movement
- EN1621-1 Level 1 D3O® shoulder inserts for additional protection
- Body heat activates (softens) the polymer to conform to body
- Moisture-wicking, open stretch mesh for breathability
- D3O® inserts are removable for easy washing
- 100% Nylon Elastic Mesh
$124.99 - $129.99
The Carve models manage without hard shells and are therefore light and extremely comfortable to wear. They are ideal for somewhat harder use and, with the integrated Xmatter padding concept provide high impact absorption and protection. With the Carve Evo+ iXS introduce product properties like exchangeable padding, structurally improved AeroMesh of newest generation offering a higher level of comfort and structural strength.
- Xmatter Protection Foam (exchangeable)
- AeroMesh, Light, Moisture Wicking, Breathable, Anti-bacterial, Added Structural Strength, High Level Of Comfort
- Looplock Closings
- Silicon Stopper
- En1621-1:2012 Certified
- Adult-sized
$119.99
The Carve models manage without hard shells and are therefore light and extremely comfortable to wear. They are ideal for somewhat harder use and, with the integrated Xmatter padding concept provide high impact absorption and protection. With the Carve Evo+ Kids Elbow Guard, iXS introduces product properties like exchangeable padding and next-generation, structurally improved AeroMesh. offering a higher level of comfort and structural strength.
- Xmatter Protection Foam (exchangeable)
- AeroMesh, Light, Moisture Wicking, Breathable, Anti-bacterial, Added Structural Strength, High Level Of Comfort
- Looplock Closings
- Silicon Stopper
- En1621-1:2012 Certified
- Youth sizing
$144.99
The Carve models manage without hard shells and are therefore light and extremely comfortable to wear. They are ideal for somewhat harder use and, with the integrated Xmatter padding concept provide high impact absorption and protection. With the Carve Evo+ we introduce product properties like exchangeable padding, structurally improved AeroMesh of newest generation offering a higher level of comfort and structural strength.
- Xmatter Protection Foam (exchangeable)
- AeroMesh, Light, Moisture Wicking, Breathable, Anti-bacterial, Added Structural Strength, High Level Of Comfort
- Looplock Closings
- Silicone Stopper
- En1621-1:2012 Certified
- Youth sizing
$149.99 - $154.99
The Carve models manage without hard shells and are, therefore, light and extremely comfortable to wear. They are ideal for somewhat harder use and, with the integrated Xmatter padding concept, provide high impact absorption and protection. With the Carve Evo+, we introduce product properties like exchangeable padding and the newest generation of structurally improved AeroMesh, offering a higher level of comfort and structural strength.
- Xmatter protection foam (exchangeable)
- AeroMesh, light, moisture wicking, breathable, anti-bacterial, added structural strength, high level of comfort
- LoopLock closings
- Silicone gripper
- Certifications: EN1621-1:2012, EN14362-1:2012, EN14362-3:2012, PFOS/PFOA (SGS Taiwan Ltd.)
- Material composition: 40% Polyester, 25% PU, 15% Nylon, 15% Kevlar, 5% EVA
$139.99
The Carve EVO+ guards are light and extremely comfortable to wear. These guards are ideal for more demanding use due to the integrated Xmatter padding that allows for high impact absorption and protection. With the Carve Evo+ we introduce product properties like exchangeable padding, and structurally tough AeroMesh that offers a high level of comfort and structural strength.
- Xmatter protection foam (exchangeable)
- Low friction impact shells to absorb and distribute impact
- AeroMesh light, moisture wicking, breathable, anti-bacterial
- LoopLock closures
- Silicone stopper
- EN1621-1:2012 certified
$159.99
The Carve EVO+ guards are light and extremely comfortable to wear. These guards are ideal for more demanding use due to the integrated Xmatter padding that allows for high impact absorption and protection. With the Carve Evo+ we introduce product properties like exchangeable padding, and structurally tough AeroMesh that offers a high level of comfort and structural strength.
- Xmatter protection foam (exchangeable)
- Low friction impact shells to absorb and distribute impact
- AeroMesh light, moisture wicking, breathable, anti-bacterial
- LoopLock closures
- Silicone stopper
- EN1621-1:2012 certified
$249.99
The Carve upper protective jersey is designed for heavier terrain and competition. It features a certified Xmatter protective foam where heavy impacts must be absorbed such as back and shoulders. A NockOut absorbent padding protects chest and ribs. A tight fit, an ergonomic cut, and a high level of moisture wicking and breathability, provide the highest level of comfort and safety. iXS protectors meet European safety standard EN1621-1 and EN1621-2 respectively.
$184.99
If you’re pushing your limits, you’re going to take risks. When things get a little too rowdy, make sure your legs are protected with iXS’s Cleaver Knee/Shin Guards. Specially designed for gravity applications, the Cleaver iss are loaded with thoughtful, high-tech features for a perfect fit with next-level protection. The AeroMesh construction is a lightweight, extremely breathable material that helps keep your legs cool and dry, even on hot summer days. And, it’s antimicrobial, so it doesn’t absorb odor. Silicone strips inside deliver a no-slip fit and iXS’s LoopLock closures provide compression with maximum security.
Highlights:
• ArmadilloDuo: dual-density padding made from flexible, shock absorbing thermoplastic.
• SqueezeBox: an articulating joint behind the knee for a great fit with max comfort while pedaling.
• NockOut: vented 3D padding in critical areas including lower leg, upper leg, and inner/outer knees.
•KneeGusset: horseshoe-shaped gusset designed to keep pads in place during impact.
•SideTap & Skid Protection: integrated, lateral padding for protection against grazes with trail obstacles.
$104.99 - $114.49
With the Flow Evo+ elbow guard, iXS provides super thin, light and comfortable elbow protectors. Developed with mountain bike legend Hans Rey, the pads are super compact to fit any backpack. The integrated Xmatter padding concept provides high impact absorption and protection. With the Flow Evo+ iXS introduce product properties like exchangeable padding and structurally improved AeroMesh of the newest generation, offering a higher level of comfort and structural strength.
- Xmatter Protection Foam (exchangeable)
- Aeromesh, Light, Moisture Wicking, Breathable, Anti-bacterial, Added Structural Strength, High Level Of Comfort
- Looplock Closings
- Silicon Stopper
- En1621-1:2012 Certified
$124.99 - $129.99
With the Flow Evo+ knee guard, iXS provides super thin, light and comfortable knee protectors. Developed with mountain bike legend Hans Rey, pads are super compact to fit any backpack. The integrated Xmatter padding concept provides high impact absorption and protection. With the Flow Evo+ we introduce product properties like exchangeable padding, structurally improved AeroMesh of newest generation offering a higher level of comfort and structural strength.
- Xmatter Protection Foam (exchangeable)
- Aeromesh, Light, Moisture Wicking, Breathable, Anti-bacterial, Added Structural Strength, High Level Of Comfort
- Looplock Closings
- Silicon Stopper
- En1621-1:2012 Certified
$199.99
The Flow Kids Upper Body Protective jersey is specifically designed for Enduro and Trail riding. It features a certified Xmatter protective foam to protect your spine and larger surface of your back. Two small and integrated stash pockets allow packing most important tools. A tight fit, an ergonomical cut and a high level of moisture wicking and breathability provide highest comfort and safety. iXS protectors meet European safety standard EN1621-1 and EN1621-2 respectively.
Key technologies
- X-matter: Flexible Viscoelastic polymer absorbs forces upon impact without hindering range of motion. The open cell compound is engineered to withstand multiple impacts in the same region while retaining its shock absorbing properties.
-FlexZip: Stretchable and flexible zipper allows garments to move with contours of the body without excess bunching.
- Aeromesh: Lightweight and anti-bacterial treated 3D performance mesh, optimized for breathability and moisture wicking.
- Youth sizing
$199.99
The Flow upper protective jersey is specifically designed for Enduro and Trail riding. It features a certified Xmatter protective foam to protect your spine and larger surface of your back. Two small and integrated stash pockets allow packing most important tools. A tight fit, an ergonomical cut and a high level of moisture wicking and breathability provide highest comfort and safety. iXS protectors meet European safety standard EN1621-1 and EN1621-2 respectively.
Key technologies
- X-matter: Flexible Viscoelastic polymer absorbs forces upon impact without hindering range of motion. The open cell compound is engineered to withstand multiple impacts in the same region while retaining its shock absorbing properties.
-FlexZip: Stretchable and flexible zipper allows garments to move with contours of the body without excess bunching.
- Aeromesh: Lightweight and anti-bacterial treated 3D performance mesh, optimized for breathability and moisture wicking.
$149.99
With the Flow ZIP knee guard, iXS provides super thin, light and comfortable knee protectors. According to its name the Flow ZIP features an elastic zip FlexZip which simplifies putting them on and off. Developed with mountain bike legend Hans Rey, pads are super compact to fit any backpack. The integrated Xmatter padding concept provides high impact absorption and protection. With the Flow ZIP iXS introduce product properties like exchangeable padding, structurally improved AeroMesh of newest generation offering a higher level of comfort and structural strength.
- Xmatter Protection Foam (exchangeable)
- Flexzip, Stretchable Zipper
- Aeromesh, Light, Moisture Wicking, Breathable, Anti-bacterial, Added Structural Strength, High Level Of Comfort
- Looplock Closings
- Silicon Stopper
- En1621-1:2012 Certified
$77.99
iXS’s Hack EVO Kids Elbow Pads provide a perfect blend of minimal weight, low-profile design, and ample protection for youth trail-riding needs. Comfortably pedal to the top in them or slide them into your bag and slip them on for the rowdy descent. Loaded with high-tech features, the Hack EVO pads are great for seasoned pros and newbs alike. Their AeroMesh material is lightweight and extremely breathable to help keep your arms cool and dry, even on hot summer days. And, it’s antimicrobial so it doesn’t absorb odor. iXS’s Qmatter padding makes the Hack ideal for trail-riding with its lightweight, supple foam that allows maximum mobility and disperses shock forces during impact.
Other highlights:
- NockOut: vented 3D padding in critical areas including lower leg, upper leg, and inner/outer knees
- Nylon cover: heavy-duty nylon covers resist damage, even after repetitive abrasions
- Wide Velcro straps provide maximum security and comfort to keep pads in place
- Silicone strips inside prevent slippage for a secure fit while pedaling and descending
- Youth sizing
$82.99
iXS’s Hack EVO Kids Knee Pads provide a perfect blend of minimal weight, low-profile design, and ample protection for your trail-riding needs. Comfortably pedal to the top in them or slide them into your bag and slip them on for the rowdy descent. Loaded with high-tech features, the Hack EVO pads are great for seasoned pros and newbs alike. Their AeroMesh material is lightweight and extremely breathable to help keep your legs cool and dry, even on hot summer days. And, it’s antimicrobial so it doesn’t absorb odor. iXS’s Qmatter padding makes the Hack ideal for trail-riding with its lightweight, supple foam that allows maximum mobility and disperses shock forces during impact.
Other highlights:
- NockOut: vented 3D padding in critical areas including lower leg, upper leg, and inner/outer knees
- Nylon cover: heavy-duty nylon covers resist damage, even after repetitive abrasions
- Wide Velcro straps provide maximum security and comfort to keep pads in place
- Internal silicone strips prevent slippage for a secure fit while pedaling and descending
- Youth sizing
$87.99
iXS’s Hack EVO Knee Pads provide a perfect blend of minimal weight, low-profile design, and ample protection for your trail-riding needs. Comfortably pedal to the top in them or slide them into your bag and slip them on for the rowdy descent. Loaded with high-tech features, the Hack EVO pads are great for seasoned pros and newbs alike. Their AeroMesh material is lightweight and extremely breathable to help keep your legs cool and dry, even on hot summer days. And, it’s antimicrobial so it doesn’t absorb odor. iXS’s Qmatter padding makes the Hack ideal for trail-riding. Qmatter is a lightweight, supple foam that allows maximum mobility and disperses shock forces during impact.
Other highlights:
•NockOut: vented 3D padding in critical areas including lower leg, upper leg, and inner/outer knees
•Nylon cover: heavy-duty nylon covers resist damage, even after repetitive abrasions
•Wide Velcro straps provide maximum security and comfort to keep pads in place
•Internal silicone strips prevent slippage for a secure fit while pedaling and descending
$79.99
The Hack Evo+ guards are our starter option for soft protectors. They combine the characteristics of the Flow and Carve series cost-effectively. These guards are light and extremely comfortable to wear.
- Qmatter, protective padding
- Silicone stopper
- AeroMesh- light, moisture wicking, breathable, anti-bacterial
- EN1621-1:2012 (L1)
$82.49
The Hack Evo+ guards are our starter option for soft protectors. They combine the characteristics of the Flow and Carve series cost-effectively. These guards are light and extremely comfortable to wear.
- Qmatter, protective padding
- Silicone stopper
- AeroMesh- light, moisture wicking, breathable, anti-bacterial
- EN1621-1:2012 (L1)
- Available in youth sizing
$94.99
The Hack Evo+ guards are our starter option for soft protectors. They combine the characteristics of the Flow and Carve series cost-effectively. These guards are light and extremely comfortable to wear.
- Qmatter, protective padding
- Silicone stopper
- AeroMesh- light, moisture wicking, breathable, anti-bacterial
- EN1621-1:2012 (L1)
- Available in youth sizing
$89.99
The Hack Evo+ guards are our starter option for soft protectors. They combine the characteristics of the Flow and Carve series cost-effectively. These guards are light and extremely comfortable to wear.
- Qmatter, protective padding
- Silicone stopper
- AeroMesh- light, moisture wicking, breathable, anti-bacterial
- EN1621-1:2012 (L1)
$92.49
The Hack Evo guards are our entry-level option for soft protectors. They combine the characteristics of the Flow and Carve series cost-effectively. These knee guards are light and extremely comfortable to wear.
- Qmatter, protective padding
- Low friction impact shells to absorb and distribute impact
- Silicone stopper
- AeroMesh light, moisture wicking, breathable, anti-bacterial
- EN1621-1:2012 (L1)
$99.99
The Hack Evo guards are our entry-level option for soft protectors. They combine the characteristics of the Flow and Carve series cost-effectively. These knee guards are light and extremely comfortable to wear.
- Qmatter, protective padding
- Low friction impact shells to absorb and distribute impact
- Silicone stopper
- AeroMesh light, moisture wicking, breathable, anti-bacterial
- EN1621-1:2012 (L1)
$169.99
That voice in your head that’s telling you to back off and slow it down—yeah, you don’t need to listen to him. . iXS’s Mallet Knee/Shin Guards have you covered, literally. They are lightweight, loaded with high-tech features, and they fit securely to give you extra confidence. The AeroMesh material is lightweight and extremely breathable to help keep your legs cool and dry, even on hot summer days. And, it’s antimicrobial so it doesn’t absorb odor. Silicone strips inside deliver a no-slip fit and iXS’s LoopLock closures provide compression with maximum security.
• ArmadilloDuo: dual-density padding made from flexible, shock absorbing thermoplastic
• SqueezeBox: an articulating joint at the knee for a great fit with max comfort while pedaling
• NockOut: vented 3D padding in critical areas including lower leg, upper leg, and inner/outer knees
• KneeGusset: horseshoe-shaped gusset designed to keep pads in place during impact
$184.99
The Trigger models manage without hard shells and are therefore light and with its asymmetrical design extremely comfortable to wear. They are ideal for somewhat harder use and, with the integrated Xmatter padding concept provide high impact absorption and protection. With the Trigger we introduce product properties like exchangeable padding, structurally improved AeroMesh of newest generation offering a higher level of comfort and structural strength.
- Xmatter Protection Foam (exchangeable)
- Asymmetrical Design, Left And Right Specifically And Individually Formed For Improved Comfort.
- Anatomically Formed For Improved Comfort, Flexibility And Function
- Aeromesh, Light, Moisture Wicking, Breathable, Anti-bacterial, Added Structural Strength, High Level Of Comfort
- Looplock Closings
- Silicon Stopper
- En1621-1:2012 Certified
$159.99
The Flow upper body protective vest is specifically designed for enduro and trail riding. It features certified and removable Xmatter protective foam pads, positioned to specifically protect the spine and larger surface area of the back. Two small, integrated stash pockets are designed to pack essential tools. This product features a tight fit with an agronomical cut and is secured with an elastic FlexZip center-front zipper that comfortably bends and moves with your range of motion. The materials have a high level of moisture wicking and breathability, ensuring all day comfort while you ride.
- Protective Xmatter foam at back
- FlexZip zipper that bends and flexes with movement
- Stash pockets
- Available in youth sizing
Page 1 of 4
Next page